|
First, a thick layer of acrylic gesso was applied to a sheet of acrylic paper.
While the gesso was still wet, a thick layer of Modeling Grass were spread on top.
When the gesso was dry, several layers of more gesso mixed with plenty of water were
applied on top of the grass until the whole texture was covered in a thick layer of gesso.
(the gesso was left to dry between each layer.)
A thick layer of Purple acrylic paint was then applied, covering the whole surface.
When the purple colour was dry, a wash of Pink was as applied over the texture and left to dry.
At last, Titanium whit paint was applied with a dry brush, just touching the "top" of the texture.
Artist Notes:
The paint need to be dry before the next layer can be applied!
Modeling Grass is usually available from most art and craft shops.
|
