|
First, a thick layer of Modeling Paste was applied to a sheet of acrylic paper.
While the modeling paste was still wet, white sand was spread on top and gently mixed into the paste with a Palette/Painting Knife.
The surface was then flattened with the painting knife and the modeling paste/sand mixture was left to dry for an hour.
(time depending on room temperature)
A layer of Burnt Umber was then applied, covering the whole surface.
Next a light wash of Cadmium Red Deep (Hue) and Yellow Ochre was painted over the Burnt Umber.
Artist Notes:
Acrylic gesso could also have been used instead of the Modeling Paste.
|
